![dd dd](https://info.polyglass.us/hs-fs/hubfs/dd.webp?width=530&name=dd.webp)
POLYFORZA DRIP EDGE
BUILT-UP OR MODIFIED VERSION
FACE HEIGHT 6” OR LESS
![poly-1 poly-1](https://info.polyglass.us/hubfs/poly-1.png)
FACE HEIGHT OVER 6”
![fm fm](https://info.polyglass.us/hubfs/fm.jpeg)
PolyForza Drip Edge - Request Quote Form
SHT# 1 of 1 | DATE: 02/03/22 |
DRN BY: JJC | CKD BY: MM |
DWG #: 45010-37595 | REV: A |
NOTES
- Includes concealed splice plates that must be field caulked to prevent water entry
- Unless otherwise noted, fabrication of miters and accessories are provided with a non-penetrating quicklock joint, then factory sealed watertight
- Welded accessories require minimum material thickness of .050”
- For non-90 miters, see separate print approval
- Product should be installed per provided installation instructions
- ANSI/SPRI/FM 4435/ES-1 Test Pressure up to 276 psf
- FM and Miami-Dade Approval (Max 6” Face)
APPROVALS
![approval-1 approval-1](https://info.polyglass.us/hubfs/approval-1.webp)
![approval-2 approval-2](https://info.polyglass.us/hubfs/approval-2.webp)
![approval-3 approval-3](https://info.polyglass.us/hubfs/approval-3.png)
![about-image.jpg-2 about-image.jpg-2](https://info.polyglass.us/hubfs/about-image.jpg-2.webp)
About Polyglass
A leading manufacturer of roofing and waterproofing solutions
We are able to service most of the country in few days. Technical Representatives available on-site for support. Our customers’ needs always come first!